About Us and our service
About US
Tri-State Poly Lift was founded in 2020
Our Mission
Tri-State Poly Lift is owner-operated in the Illinois–Indiana–Kentucky tri-state area and based out of Newburgh, Indiana. We are dedicated to the highest quality concrete raising and leveling services delivered with originality, pride and authenticity to our customers.
Tri-State Poly Lift was born with the idea of creating service that our customers can rely on. Our goal is to provide customer service so great that our customer relationships will last as long as our repair work. We strive to be knowledgeable in any situation in order to create a simple and easy service. Our work is done to keep our residential and commercial customer’s concrete looking up-to-date and to satisfy safety standards.
What We Do
At Tri-State Poly Lift we provide services to lift sunken concrete to a level and safe surface. We are proud partners with HMI and use a simple and eco-friendly process to provide quick and long lasting results that you can count on. Our polyfoam system can raise sidewalks, driveways, garage floors, steps, patios and much more!
What Is Concrete Raising?
Concrete raising is a specialty concrete repair technology. In essence, we attempt to lift a sunken concrete slab by pumping polyeurethane foam through the concrete, effectively pushing it up from below.
Accounts of raising large concrete slabs through the use of hydraulic pressure date back to the early 20th century. Early contractors used a mixture of locally available soils (sometimes including crushed limestone and/or cement for strength), producing a “mud-like” substance and thus the term “mudjacking.” In recent years, contractors began using expanding polyurethane foam. Each method has its benefits and disadvantages.
The raising process generally starts with drilling access holes in the concrete, strategically located to maximize lift. These holes range in size from 3/8″ up to 3″ depending on the process used.
Initial material injections fill any under slab void space. Once the void space is filled, subsequent injections will start lifting the concrete within minutes. After the slabs are lifted, the access holes are patched and the work is complete. The process is rapid when compared to traditional remove and replace applications and is minimally disturbing to the surrounding areas.
What is polyfoam lifting?
Foam raising uses Polyurethane in an injection process. A two-part polymer is injected through a hole less than one inch in diameter. Although the material is injected at a higher pressure than traditional cementitious grouts, the pressure is not what causes the lifting. The expansion of the air bubbles in the injected material below the slab surface performs the actual lifting action as the liquid resin reacts and becomes a structural foam.
The material injected below a slab to be lifted will first find weak soils, expanding into them in such a manner as to consolidate and cause sub-soils to become denser and fill any voids below the slab. One inherent property of expanding foams is that they will follow the path of least resistance, expanding in all directions. Another inherent property includes reaching a hydro-insensitive or hydrophobic state when cured with 100% cure times as little as 30 minutes. Closed-cell injections will not retain moisture and are not subject to erosion once in place.
Some closed-cell polymer foams have baseline lifting capabilities of 6,000 lbs per sq. ft. and leveling procedures have been performed in which loads as high as 125 tons have been lifted and stabilized in a surface area of less than 900 sq. ft. Some foams are even stronger, with compressive strengths of 50 psi and 100 psi in a free rise state. That is equal to 7,200 to 14,000 lbs per square ft of support.
Proud Partners With
HMI Co.
Our polyurethane foam – concrete raising material is second-to-none in the industry. Specially engineered for different applications—from residential to municipal or commercial concrete lifting—our polyurethane foam, from HMI, provides the reliability necessary for sustainable concrete leveling.
We care, both about the results we provide as well as our impact on your home and surroundings. That’s why the poly foam we use is manufactured to be the greenest filling material used in the industry. At Midwest Polyfoam, “green” is not just a buzzword, it’s a commitment to running an environmentally responsible company for the benefit of ourselves and the people we care about.
The poly foams we use are environmentally friendly, consisting of 39-49% renewable and recycled materials. HMI poly foam is a top-of-the-line material, designed specifically for different concrete applications, it allows us to easily adjust our approach to your needs
Get a free Quote Today!
Contact Info
- 7388 Bosma Drive Newburgh, IN 47630
- (812) 646-3300
- MLauer@tristatepolylift.com
Navigation
- Make a Payment
- FAQ
- Privacy Policy
- Terms of Sevice
Copyright © 2020 Tri-State Poly Lift
Powered by Tri-State Poly Lift
Contact Info
- 7388 Bosma Drive Newburgh, IN 47630
- (812) 646-3300
- MLauer@tristatepolylift.com
Navigation
- Make a Payment
- FAQ
- Privacy Policy
- Terms of Sevice
Copyright © 2020 Tri-State Poly Lift
Powered by Tri-State Poly Lift